In southern China, the prolonged high humidity during the spring and summer rainy seasons has long been a persistent production challenge for many printing and paper processing plants. Paper is a porous fibrous material that readily absorbs moisture from the air, leading to warping, curling, and uneven thickness-issues that directly interfere with the cutting stability of Roll-to-Sheet paper sheeters and the counting accuracy of paper counters. Dongguan Winner Printing Technology, based in South China and serving a large number of local paper processing enterprises, has accumulated extensive experience in on-site commissioning and workshop management under high-humidity conditions, helping factories reduce defects and downtime losses caused by high humidity.

I. Typical Manifestations of Paper Warping in High-Humidity Environments
When paper fibers absorb water, they expand more in the transverse direction than in the longitudinal direction. The most common issues include curling, warping in the middle, and inconsistent tightness within paper stacks. Coated paper, white cardstock, and kraft paper have varying degrees of resistance to deformation: thin coated paper is highly prone to waviness, thick cardstock tends to bulge in localized areas, and kraft paper softens when it absorbs water, resulting in increased interlayer friction. While deformation may not always be visible to the naked eye, changes in paper flatness-starting from the feed end-can create hidden risks for subsequent cutting, paper flipping, and counting processes.
II. Cascading Effects on the Cutting Accuracy of Web Cutters
Deformed paper fed into a web cutter is prone to slipping and misalignment as it passes through the feed rollers and the paper guide channel. Warped paper cannot lie flat against the cutting table, causing the positioning reference to shift during cutting. This results in dimensional deviations in length, skewed edges, and rough cut edges. In severe cases, warped paper can become jammed in the cutting unit, increasing the load on the cutting rollers, accelerating blade wear, and even causing paper breaks or sudden machine shutdowns. Inconsistent cutting dimensions across the same roll of base paper pose batch quality risks for subsequent processing steps.


III. Interference with the Counting and Sorting Performance of the Paper Counter and Pile Turner
When water-absorbing, warped paper is stacked, the gaps between layers in the paper pile become unstable; the wavy edges cause sheets to stick together or become misaligned. At the Paper Counter station, photoelectric detection signals are disrupted by the undulations in the paper, frequently resulting in double counts or missed counts. When fed into the Pile Turner station, paper shaking makes it difficult to align the sheets; the paper pile is hard to stack neatly, and after turning, the pile becomes uneven, requiring manual re-stacking and significantly reducing automation efficiency. Static electricity combined with high humidity further exacerbates the paper sticking problem.
IV. Comprehensive Improvement Plan for the Workshop and Equipment
Control measures should prioritize the environment; stabilizing workshop humidity is the fundamental solution. Dehumidifiers can be used to maintain workshop humidity at a stable 45%–60% RH. Raw paper and semi-finished products should be stored in sealed containers to prevent exposure to moisture. Regarding equipment calibration, Dongguan Winner Printing Technology recommends appropriately adjusting the paper feed tension and pressure of the pressure rollers on the paper cutter to reduce the likelihood of warped paper causing jams; regularly cleaning the photoelectric sensors on the paper counter to optimize detection sensitivity; and extending the shaking and alignment durations in the paper-turning unit to minimize double-sheet feeding. At the same time, production schedules should be planned reasonably, with severely damp paper prioritized for drying and stabilization before being fed into the machine.

Paper deformation caused by high-humidity environments cannot be fully resolved through equipment debugging alone; it requires a coordinated approach involving environmental control, material storage, and equipment parameter adjustments. Dongguan Winner Printing Technology offers on-site inspections, equipment parameter tuning, and comprehensive post-press production line adaptation solutions to paper product manufacturers in South China, helping businesses maintain stable cutting and counting accuracy in humid climates while reducing scrap and rework.
